Electrical repair · Raleigh · Wake County

Electrical Repair & Troubleshooting in Raleigh & Wake County

Flickering lights, a breaker that keeps tripping, dead outlets, half the house without power. We find the cause, show you, and fix it. No trip charge for the quote.

Most electrical problems come down to one loose or failed connection somewhere between the meter and the device that stopped working. Finding it is the job. Our electricians carry the meters and the parts to track it down in one visit, fix it, and tell you plainly whether anything else in the house needs attention. If it turns out to be the power company’s side, we’ll tell you that too.

4.9 ★ · 620+ reviews · NC License #29565 · 5-year workmanship warranty · Phones answered in-house

4.9 ★Average rating620+ reviews on Google, Yelp & Nextdoor
WrittenQuote before the workYou approve the price first. No trip charge for the quote
No commissionOn our electriciansNobody is paid on how much you spend
5-yearWorkmanship warrantyParts and labor on our workmanship
  • NC Electrical License#29565
  • Licensed & insuredBackground-checked, uniformed crews
  • BBBA+ accredited
  • NECAMember contractor
  • EatonCertified Contractor Network
  • GeneracAuthorized dealer & installer
  • Warranty5 years, parts & labor, on our workmanship · terms
The four calls we get most

What’s usually behind it, and what’s safe to try first

Each of these has a couple of harmless things worth checking before you call, and a point where you should stop and let us look.

Flickering or dimming lights

One fixture: usually the bulb or the dimmer. LED bulbs on an older dimmer that wasn’t made for them flicker, and a bulb that’s not screwed in all the way does the same.

One room or one circuit: a loose connection at a switch or outlet on that circuit. Push-in (“back-stab”) connections on receptacles loosen with age and heat; we find the one that’s arcing and re-terminate it.

The whole house, especially lights that dip when the AC or dryer kicks on, or go bright in one room and dim in another: that points at the service itself, a loose connection at the meter, the panel or the utility’s neutral. That one deserves a visit soon.

Try first: swap the bulb, check the dimmer is rated for LED. Call us if: it’s more than one fixture, it’s new, or you hear buzzing with it.

Breaker keeps tripping

Trips the instant you reset it: a short or a ground fault somewhere on the circuit, often inside a device, a cord or a box. Leave it off.

Trips after a while, under load: the circuit is overloaded (space heater, hair dryer, microwave and toaster on the same kitchen circuit) or an appliance is failing and drawing too much.

AFCI or GFCI breaker: these trip on tiny faults a standard breaker ignores, and some appliances set them off. Sometimes it’s a real fault; sometimes the breaker or the device needs to change. We test to tell which. Breakers also simply wear out, and a breaker that’s warm to the touch is telling you something.

Try first: unplug everything on the circuit, reset it once (push fully OFF, then ON). Call us if: it trips again with nothing plugged in, trips right away, or the breaker is warm.

Dead outlets

Check for a tripped GFCI first. One GFCI in a bathroom, the kitchen, the garage or outside often protects a string of ordinary-looking outlets downstream, sometimes in a different room. Press RESET on every GFCI you can find.

Then the panel: a tripped breaker often sits in the middle, not clearly OFF. Push it fully off and back on.

Still dead: it’s almost always a loose, burned or failed connection on an outlet upstream of the dead one, on the same circuit. The outlet that looks fine is often the one that failed. Half of an outlet dead and half live usually means it’s wired to a wall switch.

Try first: GFCI resets, then the breaker. Call us if: the outlet is warm, discolored, smells, or a GFCI won’t reset.

Partial power: some of the house is out

Whole house dark: check the neighbors and the Duke Energy outage map before anything else. That’s the utility.

About half the house out, a 240-volt appliance (dryer, range, AC) running weakly or not at all, or lights unusually bright in some rooms and dim in others: one of the two legs feeding the house is lost, or the neutral is loose. It can be on the utility’s side of the meter or ours. Either way it’s hard on electronics and motors.

One room or a few outlets: back to the GFCI and breaker checks above.

Try first: the outage map, then GFCI and breakers. Call us if: it’s half the house or lights are brightening and dimming. Unplug TVs, computers and the fridge until it’s sorted.

Don’t keep resetting it

Turn the breaker off and call if you notice any of these

Electrical faults don’t fix themselves, and the ones that make heat get worse each time they’re powered back up. These are the signs that the problem is making heat.

  • A burning or fishy plastic smell near an outlet, switch, light or the panel
  • An outlet, switch, cord or breaker that’s warm to the touch
  • Scorch marks, melted plastic or discoloration on a device or cover plate
  • Buzzing, sizzling or crackling from a wall, a fixture or the panel
  • Sparks from an outlet when you plug something in (more than a tiny blue blip)
  • A breaker that trips again the moment you reset it
  • Lights brightening and dimming on their own across the house
What to expect

How a repair visit goes

One electrician, one visit, and a straight answer. Here’s the order we work in.

1

We listen first

When it happens, what else is running, what changed recently. That usually narrows it to a circuit before a tool comes out.

2

We test, we don’t guess

Voltage at the panel and at the devices, breaker and GFCI tests, and a look at the connections on the circuit in question.

3

We show you the cause

You see the burned terminal, the back-stabbed outlet or the worn breaker before anything is replaced, and we tell you if we spotted anything else worth knowing about.

4

Written price, then the repair

You get the price in writing and approve it before the work starts. Most repairs are finished the same visit from the parts on the truck.

Pricing

What an electrical repair costs

Finding the problem and quoting the fix is free. Most repairs are one flat price, and you approve it before we start.

Diagnosis & quote

$0

100% free, no trip charge

  • We find the cause and show you
  • Written price for the fix
  • No obligation if you say no
Minor repair

$272.95

One flat price

  • Loose or burned connections, a failed switch, outlet or breaker, a dead circuit traced and restored
  • 5-year workmanship warranty
Major repair

$559.68

Bigger jobs, still flat

  • Repairs that take real time or several parts; your electrician tells you which before starting
  • 5-year workmanship warranty

Replacing outlets, switches and breakers

$272.95 minimum for the first device, with bundle pricing when you have several done in one visit. Ask for the bundle when you book.

Sales tax may apply.

Questions

Electrical repair questions

Why do my lights flicker when the AC comes on?

A quick dip when a big motor starts is normal: the compressor pulls a lot of current for a split second. Flicker that lasts, that’s getting worse, or that happens with other appliances too usually means a loose or corroded connection at the service, the panel or the meter, where all the current for the house passes through. Those connections can be on the utility’s side or yours; we check and tell you which.

How much does it cost to have an electrician find the problem?

Nothing. The diagnosis and the written quote are free, with no trip charge. If you go ahead, most repairs are a flat $272.95 (minor) or $559.68 (major), and your electrician tells you which before starting. Sales tax may apply.

Is it safe to keep resetting a breaker that trips?

Once, with the loads unplugged, is fine. After that, no. A breaker trips to protect the wiring. Resetting it over and over while the fault is still there heats the wiring and the breaker each time, and a breaker that’s been tripped many times is less reliable afterwards. Leave it off and have the circuit tested.

My outlet stopped working but the breaker isn’t tripped. What now?

Look for a GFCI with its RESET button popped out: bathrooms, kitchen, garage, outdoors, sometimes a basement or laundry. One GFCI often protects several outlets in other rooms. If every GFCI resets and the outlet is still dead, a connection on that circuit has failed, often at an outlet that still works, and it needs to be opened up and repaired.

Half my house has no power. Should I call Duke Energy or an electrician?

Call us. A lost leg or a loose neutral can be on either side of the meter, and we can see from the panel which it is. If it’s Duke Energy’s connection we’ll tell you and you report it to them. Until it’s fixed, unplug electronics and keep large appliances off: an open neutral can push well over 120 volts into half the house.

Do you repair outlets and switches, or only replace them?

Both. A loose terminal gets re-terminated; a worn, cracked, burned or back-stabbed device gets replaced with a new one wired to the screw terminals. If the outlet should be a GFCI by today’s code (kitchen, bath, garage, outside, laundry) we’ll tell you, and you decide.

Will you tell me if the problem is bigger than one repair?

Yes, and we’ll show you why. Sometimes a tripping breaker is a full panel or a circuit that was never sized for how the room is used now. We’ll fix what you called about and give you a separate quote for the bigger job, with no pressure: our electricians aren’t paid on what you spend. See the ARC Promise.

Is the repair covered by a warranty?

Five years on parts and labor for our workmanship. If a part we installed fails, the manufacturer covers the part and we cover the labor to replace it for five years. Full wording in our terms.

Related services

Where we do electrical repairs

We troubleshoot and repair across Raleigh, Cary, Apex, Holly Springs, Fuquay-Varina, Garner, Morrisville, Wake Forest, Durham, Chapel Hill, Knightdale, Clayton and Angier. See the full service area.

Reviews

What repair customers say

Second opinion, fixed same day
“When I had electrical issues in my townhome I first called the big company that does a lot of advertising. They quoted me $3800 to replace the entire electric panel. I called ARC for a second opinion. They were able to fix the actual issue the same day and for $190. Nice, friendly and reliable.”
★★★★★Nancy C. · Google
Troubleshooting
“ARC was great all around. Called first thing in the morning and Jacob was out that afternoon. Quickly diagnosed our panel issue, showed us all the options, and he made it make sense for us. Great experience and would happily call again.”
★★★★★Bryan M. · Google

Read all 620+ reviews

Flickering, tripping or dead?

Diagnosis is free · most repairs are a flat $272.95

Call (919) 888-3500 Free quote